manualshive.com logo in svg

Mackie 8-BUS Series, Руководство пользователя

"Серия Mackie 8-BUS - это профессиональные микшерные консоли высокого качества. Для получения сервисной инструкции пользовательского руководства бесплатно, загрузите его с {веб-сайта}. Этот мануал поможет вам освоить все возможности вашего устройства и улучшить свой звук."

Поделиться
Скачать
background image

2-4

D i g i t a l  8 • B u s

Digital 8•Bus Description

cm

 Master SOLO button

Pressing this button solos the cur-

rently selected aux bus. Only one aux
bus may be soloed at a time, along
with any number of channels. The aux
bus remains soloed until it is manually
disengaged, or until the CLEAR SOLO

button (in the Studio/Solo Section) is pressed.

Aux bus soloing is post-Master V-Pot only.

Pressing the PFL SOLO button in the Studio
Solo Section does not affect the aux bus solo.

cn

 V-Pot Select Section

These buttons assign the V-Pots

on each channel to control indi-
vidual aux send levels. Unity gain
is at the 2 o’clock position.

AUX 1 button

Assigns channel V-Pots to con-

trol individual send levels to Aux 1
output. Additionally, an identical
signal is sent simultaneously to in-
ternal effects processor 1.

Tip:

 Internal effects 1 is returned

via FX 1 and FX 2 in Fader Bank 3.

AUX 2 button

Assigns channel V-Pots to control individual

send levels to Aux 2 output. Additionally, an
identical signal is sent simultaneously to inter-
nal effects processor 2.

Tip:

 Internal effects 2 is returned via FX 3 and

FX 4 in Fader Bank 3.

AUX 3–8 buttons

Assigns channel V-Pots to control individual

send levels to Aux 3–8 outputs, respectively.
If additional FX cards are installed in the card
cage, the Aux 3–8 sends are sent simultaneously
to internal effects processors 3–8.

Tip:

 Internal effects 3–8 are returned via FX 5

through FX 16 in Fader Bank 3.

AUX 9–10 LEVEL button

Assigns channel V-Pots to control the indi-

vidual output level being sent to Aux 9 and 10
outputs as a left/right stereo pair. Aux 9 and 10
can be used as a cue mix for PHONES 1 and 2
by selecting AUX 9–10 in the Phones/Cue Mix
1 and 2 section.

AUX 11–12 LEVEL button

Assigns channel V-Pots to control the indi-

vidual output level being sent to Aux 11 and 12
outputs as a left/right stereo pair. Aux 11 and
12 can be used as a cue mix for PHONES 1 and

2 by selecting AUX 11–12 in the Phones/Cue
Mix 1 and 2 Section.

AUX 9–10 PAN button

Assigns channel V-Pots to control the stereo

balance of the signal being sent to Aux 9 and
10 outputs as a left/right stereo pair.

AUX 11–12 PAN button

Assigns channel V-Pots to control the stereo

balance of the signal being sent to Aux 11 and
12 outputs as a left/right stereo pair.

co 

LEVEL TO TAPE

This button is designed to give you more

control over your tape sends while tracking.
The direct Tape Outs are positioned after the
channel DSPs and before the fader in the sig-
nal flow, so the channel fader has no effect on
the Tape Out signal.

Pressing the LEVEL TO TAPE button

causes the channel V-Pots to become Tape
Send level controls, after the channel DSPs.
This lets you adjust the V-Pot to get the recom-
mended meter readings on your tape deck for
the best signal-to-noise ratio, without having to
readjust the analog input TRIM control, or the
DIGITAL TRIM control.

cp

 DIGITAL TRIM

Pressing this button causes the channel

V-Pots to become digital trim controls. Digital
Trim is positioned just after the A/D converter
stage in the signal path for channels 1–48, so
it’s the first digital process in the channel.

If the Digital I/O cards are installed

(DIO•8), there is no A/D converter in the sig-
nal path for channels 25–48, so the digital trim
is the first digital control in the signal path af-
ter the Tape I/O card.

Digital Trim is a recallable function (unlike

the analog TRIM control), and can be auto-
mated in a mixdown session. It is also the only
trim control for channels 25–48.

cq

 Talkback Mic

Sounds arriving at this mic are routed to the

Phones/Cue Mix Outputs. Talkback can also be
routed to the Studio Outputs.
• The talkback mic is activated by pressing

the TALKBACK button in the Control Room
section.

• Talkback is routed to the Studio Outputs by

pressing TALKBACK TO STUDIO in the Stu-
dio/Solo section.

• The talkback level is controlled by pressing

TALKBACK LEVEL in the Studio/Solo sec-
tion. Turn the V-Pot to adjust the talkback
level.

AUX 7

AUX 8

AUX 5

AUX 6

AUX 1

AUX 3

AUX 2

AUX 4

LEVEL TO TAPE

DIGITAL TRIM

AUX 9

-

10

AUX 11

-

12

PAN

PAN

1-24

1-48

cn

co

cp

cq

MASTER

PAN

SOLO

cl

cm

bu

Содержание 8-BUS Series
























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 8-BUS Series

Calrec Apollo Installation & Technical Manual preview
Apollo
Бренд: Calrec Страницы: 124
Farm Aid 680 Owner'S Manual preview
680
Бренд: Farm Aid Страницы: 21
JB Systems Mix 2 Operation Manual preview
Mix 2
Бренд: JB Systems Страницы: 18
audiophony H11041 User Manual preview
H11041
Бренд: audiophony Страницы: 24
Cloud CX163 Installation And User Manual preview
CX163
Бренд: Cloud Страницы: 20
Hamilton Beach Commercial 840210400 Operation Manual preview
840210400
Бренд: Hamilton Beach Commercial Страницы: 40
AKG DMM 6 User Instructions preview
DMM 6
Бренд: AKG Страницы: 70
Groen D40 INA/2 Operator'S Manual preview
D40 INA/2
Бренд: Groen Страницы: 16
soundsation Vivo 16 UFX User Manual preview
Vivo 16 UFX
Бренд: soundsation Страницы: 16
DAPAudio Core Beat Manual preview
Core Beat
Бренд: DAPAudio Страницы: 16
Electrolux Dito XBEF10AS Brochure & Specs preview
Dito XBEF10AS
Бренд: Electrolux Страницы: 4
Electrolux Dito MBE40S1 Brochure & Specs preview
Dito MBE40S1
Бренд: Electrolux Страницы: 4
Electrolux Dito XBE80AS Brochure & Specs preview
Dito XBE80AS
Бренд: Electrolux Страницы: 4
Electrolux Dito XBB20S Brochure & Specs preview
Dito XBB20S
Бренд: Electrolux Страницы: 4
Electrolux Dito PSF50 Brochure & Specs preview
Dito PSF50
Бренд: Electrolux Страницы: 3
Russell Hobbs RHHM16CAN Owner'S Manual preview
RHHM16CAN
Бренд: Russell Hobbs Страницы: 8
Topp Music Gear MXi.1222CFX User Manual preview
MXi.1222CFX
Бренд: Topp Music Gear Страницы: 24
LD AM 8 LDAM8 User Manual preview
AM 8 LDAM8
Бренд: LD Страницы: 64

Бренды по названию

Популярные бренды

Загрузить еще бренды