Mackie 8-BUS Series, Руководство пользователя

Страница: 59 / 247

5-2
D i g i t a l 8 • B u s
Preparing for a Session
Creating a New Folder
You can create a new folder at any level
of the file heirarchy.
TO CREATE A NEW FOLDER
From the console:
1. Press the SAVE button in the Setup
Section.
Note: You can create a new folder from the
Save, Save As..., New, or Load menus.
2. The Fat Channel Display now shows
the “Save Session” menu. An arrow
appears in the right side of the display,
indicating that you can access another
page by pressing the NEXT button.
3. Press the NEXT button, and the
directory navigator appears in the
display. The current folder (folder and
directory are used interchangeably
here) is indicated in the upper-right
side of the display.
4. You can navigate to a different folder
by using the SELECT buttons under
“ChangeDir” and the Scan arrows.
• To move toward the root directory,
scan left until “[BACK DIR]” appears
in the upper-left side of the display,
then press the SELECT button under
“ChangeDir.”
• To move
away from the root
directory, scan right until the folder
name you want to open appears in the
display, then press the SELECT button
under “ChangeDir.”
5. When you have the folder you want
displayed as the current directory,
press the SELECT button under “New”
to create a new folder within the
current folder.
6. The “Create Folder” menu appears. To
name the folder:
• Turn the first V-Pot to change the
letters.
• Press the SELECT buttons below
the arrows to move the cursor left and
right. You must use at least 3, and up
to 20, characters to name a file.
56 INPUT / 72 CHANNEL DIGITAL MIXER
D8B
S a v e S e s s i o n " S t a r t u p " ? - >
C a n c e l Y e s
GROUP GENERAL PLUG INS DIGITAL I/O
SAVE SAVE AS... NEW LOAD
SETUP
56 INPUT / 72 CHANNEL DIGITAL MIXER
D8B
< - [ B A C K D I R ] C u r : S t a r t u p
< < S c a n > > N e w C h a n g e D i r
56 INPUT / 72 CHANNEL DIGITAL MIXER
D8B
( C r e a t e F o l d e r )
< < > > C a n c e l C r e a t e