Mackie 8-BUS Series, Руководство пользователя

Страница: 69 / 247

5-12
D i g i t a l 8 • B u s
Preparing for a Session
2. Begin setting rough mixes. These may
include send levels to tape, monitoring
levels from tape, aux send levels, and
EQ and effects settings.
3. Once the desired settings have been
made, click on Edit in the upper-left
side of the box and select “New
Snapshot” in the drop-down menu. A
new snapshot is created using the first
unused number. You can give the
snapshot a new name by double-
clicking on the name and typing in the
characters.
4. There are a number of other options
available in the Edit menu for deleting
snapshots, renumbering (in sequential
numerical order, beginning with 1),
changing and storing a snapshot, and
locking and unlocking a snapshot.
5. Click on the Close button in the upper
right corner of the dialog box to
remove the Snapshots dialog box from
the screen (or click on the Snapshot
button in the menu bar, or press Ctrl-3
on the keyboard).
Recalling Snapshots
TO RECALL SNAPSHOTS
From the console:
1. Press the SNAPSHOT button in the
Transport Section, if it’s not already
selected.
2. Type in the two-digit snapshot number
you want to recall using the number
buttons. The number appears in the
RANGE display.
3. Press the ENTER button. The console
updates to indicate the selected
snapshot. If you’re recording an
automation pass, the snapshot data
will be written to the current session.
SMPTE VIEW
SET TIME
MINUTES HOURS SECONDS FRAMES
BARS BEATS LOOP TICKS
POSITION RANGE
MODE
FROM TO
2 3 4 5
7
1
6 8 9 0
ENTER STORE LOCATOR
LOOP
SNAPSHOT
JOG & SHUTTLE
SHUTTLE
REWIND FAST FWD STOP PLAY RECORD