Mackie 8-BUS Series, Руководство пользователя

Страница: 86 / 247

6-9
O w n e r ’ s M a n u a l
Starting a New Session
TO ASSIGN CHANNELS TO TAPE OUTPUTS
From the screen:
Tape out assignment is made with the
OUT box at the top of each channel
strip.
1. In the OUT box at the top of the chan-
nel strip, a hyphen indicates that the
channel is not assigned to a direct out.
Click and hold in the OUT box and a
drop-down menu appears. Select the di-
rect out you want by dragging down
the menu until the channel you want is
highlighted, then release the mouse to
select it. The number will appear in the
OUT box. Select OFF to disconnect the
channel from a direct out, and select
RESET ALL to clear all the channels
to OFF.
Assigning Channels to a Bus Output
If you assign a channel to an odd/even
pair of buses (i.e., Buses 1 and 2, Buses 3
and 4, etc.), the channel pan control pans
the signal between the two buses.
Note: The Bus Assignment Section is dis-
abled on Group Master & MIDI faders
(1–16) when Fader Bank 4 is selected.
TO ASSIGN CHANNELS TO BUS OUTPUTS
From the console:
1. Press a BUS button in the Bus Assign-
ment Section. The ASSIGN button
lights on all channels that are already
assigned to the selected bus.
2. Press the ASSIGN button on any chan-
nel to assign it to the selected bus. You
can change Fader Banks to assign
channels from different banks to the
selected bus. Press the ASSIGN button
again to remove it from the selected
bus (the ASSIGN LED turns off).
BUS 1
BUS 2
BUS 3 BUS 4
BUS 5
BUS 7
BUS 6
BUS 8
L-R ROUTE TO
TAPE
ASSIGNMENT
ASSIGN ASSIGN
ASSIGN ASSIGN
ASSIGN ASSIGN
ASSIGN ASSIGN
ASSIGN ASSIGN
13
37
ASSIGN
WRITE
REC/RDY