Mackie 8-BUS Series, Руководство пользователя

Страница: 72 / 247

5-15
O w n e r ’ s M a n u a l
Preparing for a Session
• To change a locate point to a new time,
highlight the locate point, enter the new
time in the time display and click on the
“Store” button.
You can store a locate point on the fly:
• Roll the tape.
• With the Transport window open, click
on the “New” button at the point in time
you want to store the locate. A new
locate point appears in the cue list using
the first unused number.
Note: The name of the most recent locate
point appears as the Title in the Transport
window.
Recalling Locate Points
TO RECALL LOCATE POINTS
From the console:
1. Press the LOCATOR button in the
Transport Section.
2. Use the number buttons to enter the
desired two-digit locate number. The
number appears in the RANGE display.
3. Press the ENTER button. The
POSITION display updates according
to the new locate point, and a
corresponding MMC locate message is
sent out the MIDI port to the
recorder(s).
TO RECALL LOCATE POINTS
From the screen:
1. Click on the Locator menu button in
the lower menu bar. The Transport
window appears in the screen.
2. Double-click on the desired locate
point’s number, in the gray area.
3. The console updates according to the
new locate point, and a corresponding
MMC locate message is sent out the
MIDI port to the recorder(s).
SMPTE VIEW
SET TIME
MINUTES HOURS SECONDS FRAMES
BARS BEATS LOOP TICKS
POSITION RANGE
MODE
FROM TO
2
3 4
5
7
1
6 8 9
0
ENTER STORE LOCATOR LOOP SNAPSHOT
JOG & SHUTTLE
SHUTTLE
REWIND FAST FWD STOP PLAY RECORD