Mackie 8-BUS Series, Руководство пользователя

Страница: 164 / 247

7-7
O w n e r ’ s M a n u a l
Automation
TO WRITE FADER MOVES IN TRIM MODE
From the screen:
1. Click on the Locator button in the
lower menu bar. The Locator window
appears.
2. Click on the TRIM button in the Locator
window. All the faders jump to their
unity positions. You can readjust the
fader positions at this point, if required.
If you are going to add more than 10 dB
to the existing fader value, lower the
fader so that you have enough fader
movement available to add to the
existing fader position (see note below).
3. Roll your tape by clicking on the PLAY
button in the Locator window.
4. Place all the tracks you want to write
to automate into WRITE mode, or
engage AUTO TOUCH mode.
5. Make your level changes by clicking on
the fader(s) and moving them up or
down at the desired points. Note that
any previous moves are retained, but at
a modified overall level determined by
your trim move.
Note: Be careful that you don’t run out of
headroom: you cannot have your fader near
the top of its travel already and then add a
lot more to it in Trim mode. The ceiling
stays at +10 dB, no matter how you do it.
Writing Mutes
TO WRITE MUTES
From the console:
1. Turn off the BYPASS button in the
Automation Section to engage the
automation functions.
2. Press the MUTES button to engage
Mutes mode, if it’s not already lit.
3. Press the PLAY transport control, or
press Play on the recorder, to initiate
timecode.
original pass
ad
dit
iona
l pass
res
ult
ing level
TRIM MODE (maxing out)
∞
(min)
+10 dB
(max)
A
punch in
B
punch out
time
fader position
BYPASS FADERS MUTES AUTO TOUCH
FADER MOTORS
OFF
PAN ALL TRIM LEVELS
AUTOMATION