Mackie 8-BUS Series, Руководство пользователя

Страница: 22 / 247

2-7
O w n e r ’ s M a n u a l
Digital 8•Bus Description
eq TALKBACK TO STUDIO button
Routes sounds arriving at the in-panel Talk-
back Mic to the Studio Outputs.
Note: Make sure the studio speakers are lo-
cated in another room to avoid feedback when
the TALKBACK TO STUDIO button is active.
er CLEAR SOLO button
Disengages all solos throughout the console
with the push of a single button.
es
SOLO LEVEL button
Press this button to assign the V-Pot in the
STUDIO/SOLO section to control the solo level
being fed to the Control Room outputs.
et STUDIO LEVEL button
Press this button to assign the V-Pot in the
STUDIO/SOLO section to control the output
level to the Studio outputs.
eu TALKBACK LEVEL button
Press this button to assign the V-Pot in the
STUDIO/SOLO section to control the preamp
level for the in-panel Talkback Mic.
fl RUDE SOLO LIGHT
Whenever a SOLO button is engaged, the
RUDE SOLO LIGHT blinks to let you know. In
addition, when the SELECT/SHIFT, CONTROL,
or ALT buttons are pressed, the RUDE SOLO
LIGHT lights continuously to indicate that a
modifier key is active.
Phones/Cue Mix Section
These two matrices select the source(s) for
the Phones outputs, set Phones levels, and add
effects to the cue mix.
CONTROL ROOM
COPY MIX TO CUE AUX 9-10
AUX 11-12 CONTROL ROOM
COPY MIX TO CUE AUX 9-10
AUX 11-12
LEVEL
LEVEL
PHONES/CUE MIX 1 PHONES/CUE MIX 2 fn
fo
fp
fq
fr
fn
fo
fp
fq
fr
fn AUX 9–10 button
Assigns the stereo Aux Send 9–10 to the
PHONES output.
fo
AUX 11–12 button
Assigns the stereo Aux Send 11–12 to the
PHONES output.
fp COPY MIX TO CUE button
Pressing this button causes all the channel
fader settings to be copied to the channel
V-Pots for the selected Aux 9–10 or Aux 11–12
Send, including the effects returns on Fader
Bank 3. This allows you to quickly create a cue
mix based on your overall L-R mix, which you
can then fine-tune to suit your performers.
Note: The COPY MIX TO CUE function may
not be implemented in the first release of the
Mackie Real Time OS software. Stay tuned to
Mackie’s web site for software updates.
fq CONTROL ROOM button
Assigns the same source as the Control
Room to the PHONES output. Solo signals are
also routed to the PHONES output when Con-
trol Room is selected.
fr LEVEL V-Pot
Adjusts the PHONES output level.
Control Room Section
These buttons select the source
for the Control Room outputs, turn
the outputs on and off, and adjust the
listening level.
fs 2 TRACK A button
Selects the signal at the 2 TRACK
A inputs as the Control Room source.
ft 2 TRACK B button
Selects the signal at the 2 TRACK
B inputs as the Control Room source.
fu 2 TRACK C button
Selects the signal at the 2 TRACK
C inputs as the Control Room source.
gl DIGITAL IN 1 button
Selects the AES/EBU digital input as the
Control Room source.
gm DIGITAL IN 2 button
Selects the S/PDIF digital input as the Con-
trol Room source.
gn MASTER L-R button
Selects the main L-R output bus as the Con-
trol Room source.
go MONO button
Combines the left and right signals into a
monaural signal and sends it to the left and
right Control Room outputs (NEAR FIELD and
MAIN). This lets you quickly monitor how your
mix sounds in mono.
2 TRACK A DIGITAL IN 1
2 TRACK B DIGITAL IN 2
2 TRACK C
MASTER
L-R
NEAR FIELD MAIN
DIM TALKBACK
CONTROL ROOM
SPEAKER LEVEL
MONO
SPEAKERS
fs
ft
fu gl
gm
gn
gp gq
gs gt
gr
go