Mackie 8-BUS Series, Руководство пользователя

Страница: 149 / 247

6-72
D i g i t a l 8 • B u s
Starting a New Session
TO ADD EFFECTS
From the screen:
1. Click on the CARD A, B, C, or D but-
ton in the lower menu bar to open the
Effects control panel.
2. Select the type of effect you want to
use with the selected FX card, and ad-
just the parameters for the selected
effect. See “Selecting Internal Effects”
on page 6-53 for more information on
selecting and adjusting internal effects.
3. Click on the AUX button in the V-Pot
Select Section that corresponds to the
effect you want to use.
4. Click and drag on the V-Pots of the
channels you want to send to the se-
lected effect, to adjust the aux send
level. Alternately, you can click and
drag on the horizontal bar in the auxes
section at the top of the channel strip
to adjust the aux send level.
5. Click and drag on the Master V-Pot to
adjust the overall aux send level to the
selected effect. You can click on the
SOLO button in the Master V-Pot Sec-
tion to monitor the aux send signal.
6. Click on the EFFECTS button to select
Fader Bank 3. Click and drag the FX
return fader(s) corresponding to the
selected effect, to control the amount
of processed signal returning to the
left and right bus.