INVT Goodrive20-EU VFD Series, Руководство по эксплуатации

Страница: 20 / 173

Goodrive20-EU Series VFD Installation guidelines
-15-
Environment Conditions
Storage
temperature
-40°C to +70°C, and the temperature changing rate is less than 1°C/minute.
Running
environment
condition
The installation site of the VFD should fulfill the following requirements.

Away from electromagnetic radiation sources.

Away from oil mist, corrosive gases and combustible gases.

Ensure foreign object like metal powder, dust, oil and water will not fall into
the VFD (do not install the VFD onto combustible object like wood).

Away from radioactive substance and combustible objects.

Away from harmful gases and liquids.

Low salt content.

No direct sunlight.
Altitude

Below 1000m.

When the altitude exceeds 3000m, consult the local INVT dealer or office
for details.

When the altitude exceeds 1000m, derate by 1% for every increase of
100m.
Vibration Max. vibration acceleration: 5.8m/s
2
(0.6g)
Installation
direction
The VFD should be installed on an upright position to ensure sufficient cooling
effect.
Note:

Goodrive20-EU series VFDs should be installed in a clean and ventilated environment
according to enclosure classification.

Cooling air must be clean, free from corrosive materials and electrically conductive dust.
3.1.2 Installation direction
The VFD may be installed in a cabinet.
The VFD needs be installed in the vertical position. Check the installation site according to the
requirements below.
Refer to Appendix B "Dimension drawings" for details.
3.1.3 Installation mode
a) Wall and rail mounting for the VFDs
(single phase 230V/three phase 400V, ≤2.2KW and
three phase 230V, ≤0.75KW)