INVT Goodrive20-EU VFD Series, Руководство по эксплуатации

Страница: 133 / 173

Goodrive20-EU Series VFD Communication protocol
-128-
ASCII master command message (the
command sent by the master to VFD)
ASCII slave response message (the
message sent by the VFD to master)
Low bit of write data
'0'
Low bit of write data
'0'
'4' '4'
High bit of data
content
'1'
High bit of data
content
'1'
'3' '3'
Low bit of data content
'8'
Low bit of data content
'8'
'8' '8'
LRC CHK Hi '5' LRC CHK Hi '5'
LRC CHK Lo '9' LRC CHK Lo '9'
END Hi CR END Hi CR
END Lo LF END Lo LF
7.3.2.3 Command code 08H (0000 1000), diagnosis
Meaning of sub function code:
Sub function code Description
0000 Return inquiry message data
For instance: carry out circuit detection on drive address 01H, the content of inquiry message
word string is the same with response message word string, its format is listed as below:
ASCII master command message (the
command sent by the master to VFD)
ASCII slave response message (the
message sent by the VFD to master)
START ':' START ':'
ADDR
'0'
ADDR
'0'
'1' '1'
CMD
'0'
CMD
'0'
'8' '8'
High bit of write data
address
'0'
High bit of write data
address
'0'
'0' '0'
Low bit of write data
address
'0' Low bit of write data
address
'0'
'0' '0'
High bit of data
content
'1' High bit of data
content
'1'
'2' '2'
Low bit of data content
'A'
Low bit of data content
'A'
'B' 'B'
LRC CHK Hi '3' LRC CHK Hi '3'
LRC CHK Lo 'A' LRC CHK Lo 'A'
END Hi CR END Hi CR
END Lo LF END Lo LF