IBM eServer 240 xSeries, Руководство пользователя, Страница: 42 / 219

Using the SCSISelect utility program
Note: If your server has a RAID adapter installed, use the configuration method
supplied with the RAID adapter to view or change SCSI settings for
attached devices.
Your server comes with a menu-driven configuration utility program, called
SCSISelect, that allows you to view and change SCSI settings.
You can use the SCSISelect Utility program to:
View the default SCSI IDs
Verify and change configuration conflicts
Perform a low-level format on a SCSI hard disk
Starting the SCSISelect Utility program
You can access this program when you start the server. The SCSISelect prompt
appears after the IBM logo appears. Press Ctrl
+
A immediately after the
SCSISelect prompt appears:
<<< Press <CTRL><A> for SCSISelect

Utility! >>>
Note: If an administrator password has been set, a prompt appears asking you to
enter the password to start the SCSISelect Utility program.
You will be prompted to select either channel A (internal) or channel B (external).
Use the Up Arrow or Down Arrow key to move the highlight bar to the various
menu choices. Press Esc to return to the previous menu. Also, you can press the
F5 key to switch between color and monochrome modes (if your monitor permits).
To change the settings of the displayed items, follow the directions on the screen.
Then, press Enter.
SCSISelect Utility program choices
The following choices appear on the SCSISelect Utility menu:
Configure/View Host Adapter Settings
SCSI Disk Utilities
Configure/View Host Adapter Settings
To view or change the SCSI controller settings, select Configure/View Host
Adapter Settings and follow the directions on the screen.
Note: On the SCSISelect Utility menu, the SCSI controller is referred to as the
Host Adapter.
This menu has the following choices:
Host Adapter SCSI ID
The assigned SCSI ID of the SCSI controller is 7.
SCSI Parity Checking
The assigned value is Enabled.
Host Adapter SCSI Termination
The assigned value is Automatic.
32
IBM xSeries User's Reference