IBM eServer 240 xSeries, Руководство пользователя

Страница: 20 / 219

Operator information panel
The operator information panel on the front of the server contains status lights.
100
MB
LINK
OK
TX
RX
OK
1 2
1
System Power Light: When this green light is on, system power is present
in the server. When this light flashes, the server is in standby mode (the
system power supply is turned off and ac current is present). When this light
is off, either a power supply, ac power, or a light has failed.
Attention: If this light is off, it does not mean there is no electrical current
present in the server. The light might be burned out. To remove all electrical
current from the server, you must unplug the server power cords from the
electrical outlets.
2
System POST Complete Light: This green light is on when the power-on
self-test (POST) completes without any errors.
3
SCSI Hard Disk Drive Activity Light: This green light is on when there is
activity on a hard disk drive.
4
Processor 1 Activity Light: This green light is on when there is
microprocessor 1 activity.
5
Processor 2 Activity Light: This green light is on when there is
microprocessor 2 activity.
6
Information Light: This amber light is on when the information log contains
information about certain conditions in your server that might affect
performance. For example, the light will be on if your server does not have
redundant power. A light on the diagnostic LED panel will also be on. (For
more information, see “Identifying problems using status LEDs” on page 151.)
7
System Error Light: This amber light is on when a system error occurs. A
light on the diagnostic LED panel will also be on to further isolate the error.
(For more information, see “Identifying problems using status LEDs” on
page 151.)
8
Ethernet Transmit/Receive Activity Light: When this green light is on,
there is transmit or receive activity to or from the server.
9
Ethernet Link Status Light: When this green light is on, there is an active
connection on the Ethernet port.
1
Ethernet Speed 100 Mbps Light: When this green light is on, the Ethernet
speed is 100 Mbps. When the light is off, the Ethernet speed is 10 Mbps.
10
IBM xSeries User's Reference