IBM eServer 240 xSeries, Руководство пользователя

Страница: 136 / 219

The format for the codes is:
fff-ttt-iii-date-cc-text message
where:
fff is the three-digit function code that indicates the function being tested
when the error occurred. For example, function code 089 is for the
microprocessor.
ttt is the three-digit failure code that indicates the exact test failure that
was encountered. (These codes are for trained service personnel and
are described in the Hardware Maintenance Manual.)
iii is the three-digit device ID. (These codes are for trained service
personnel and are described in the Hardware Maintenance Manual.)
date is the date that the diagnostic test was run and the error recorded.
cc is the check digit that is used to verify the validity of the information.
text message is a message that the diagnostic program generates that indicates
the reason for the problem. More information about the text message
follows.
Text messages
The text message format is:
Function Name: Result (Test-specific string)
where:
Function Name is the name of the function being tested when the error occurred.
This corresponds to the function code (fff) given in the previous list.
Result can be one of the following:
Passed This result occurs when the diagnostic test completes
without any errors.
Failed This result occurs when the diagnostic test discovers an
error.
User Aborted This result occurs when the user ends the diagnostic
test before it is complete.
Not Applicable This result occurs when the user specifies a
diagnostic test for a device that is not present.
Aborted This result occurs when the test could not proceed
because of the system configuration.
Warning This result occurs when a possible problem is reported
during the diagnostic test, such as when a device that is to
be tested is not installed.
Test-specific string is additional information that the user can use to analyze the
diagnostic problem.
126
IBM xSeries User's Reference