HNC Electric HV610C Series, Руководство пользователя

Страница: 37 / 176

Section IV. Keyboard Operation
24
Motor 1
parameter
Parameter description Description
F1-01 F1-05
Rated power / voltage / current / frequency / speed of
motor Model parameters,
manual input
F1-06 F1-20
Equivalent stator resistance, inductance, rotor
inductance, etc. inside the motor
Tuning parameter
Methods for obtaining the internal electrical parameters of the controlled motor by the
frequency inverter include dynamic identification, static identification, manual input of motor
parameters, etc.
Identification
method
Application
Identification
effect
No-load
dynamic
identification
Suitable for asynchronous motors. Occasions where the
motor and the application system are conveniently separated
Best
On-load
dynamic
identification
Suitable for asynchronous motors. Where the motor is not
easily separated from the application system
May
Static
identification
It is only suitable for asynchronous motors, where it is
difficult to separate the motor from the load and dynamic
identification of operation is not allowed
Poor
Manually enter
parameters
It is only suitable for asynchronous motors. When the motor
is difficult to separate from the application system, the
parameters of the same type of electric machine
successfully identified by the frequency inverter are copied
and input into the corresponding function codes of F1-00
～
F1-10
May
Automatic tuning of motor parameters (motor self - learning) steps are as follows:
The following explains the parameter identification method of the default motor 1 as an
example. The identification method of the motor 2 is the same as that of the default motor 1,
except that the function code number needs to be changed in a targeted way:

If the motor can be completely disconnected from the load, under the condition of
power failure, the motor can be mechanically separated from the load so that the
motor can rotate freely without load.

After power on, first select the frequency inverter command source (F0 - 02) as the
operation panel command channel.

Accurately input the nameplate parameters of the motor (for example, F1-00
～
F1-