Hagie UpFront STS 16, Руководство пользователя

Страница: 63 / 341

3-27
SECTION 3 –
CAB
Night Spray Lights
-If Equipped
The Night Spray Lights (located on each
side of the main boom fold section) are for
use when operating in the field after dark and
are turned on/off by the Attachment Lights
Button (located on the Machine Display
Auxiliary Controls Page). The Night Spray
Lights are adjustable and may be positioned
to light up the spray pattern.
NOTE: The Battery Disconnect Switch
(located inside the engine
compartment on the rear right-hand
side of machine - open hood to
access) must be in the ON position
to activate the Night Spray Lights.
NOTE: Turn the Night Spray Lights OFF
before entering a public roadway.
Refer to “Machine Display” provided
elsewhere in this section for operating
instructions.
Cab Filtration
RESPA® Cab Filter
The cab is featured with a dust and
aerosol filtration system to provide
continuous positive pressure in the cab by
reducing exposure to harmful particulates. A
3” (7.6 cm) air intake pipe is used to reduce
excessive fresh air intake in the cab for
improved cooling.
NOTE: The filtration system will activate
automatically approximately 10
seconds after machine start-up.
An indicator light (located on the Machine
Display Home Page) will appear if insufficient
cab air pressure should occur.
NOTE: The Insufficient Cab Air Pressure
Indicator will appear each time the
machine is started due to the initial
activation delay. The indicator will
disappear once the cab becomes
pressurized.
Refer to “Service - Filters” provided in the
Maintenance and Storage Section
elsewhere
in this manual for filter replacement
information.
Night Spray Lights (2)
(Located on each side of
the main boom fold section)
-Typical View
Cab Filtration System
(Located on the right-hand
side of the exterior cab)
-Typical View
Insufficient Cab Air Pressure Indicator
(Located on the Machine Display
Home Page - Road or Field Mode)