Hagie UpFront STS 16, Руководство пользователя

Страница: 280 / 341

SECTION 9 –
MAINTENANCE AND STORAGE
9-22
SERVICE - LUBRICATION
Legs and Steering
Grease Zerk Bank
-If Equipped
Your machine may be equipped with
Grease Zerk Banks* (located on the front
side of each leg) to lubricate the leg and
steering grease zerks from one convenient
location.
•
Remove cap from the bottom of the cor-
responding grease zerk port and apply
grease as required.
Tie Rod Ball (front legs)
• Lubricate every 25 hours of operation, or
as needed.
All-Wheel Steer (AWS) ^
- If Equipped
If your machine is equipped with AWS, the
steering cylinders on the rear legs also have
grease zerks in the tie rod ends that require
lubrication.
Tower Bearing (front and rear legs)
• Lubricate daily, or as needed.
NOTICE
Failure to properly lubricate pivot and
friction points may result in unnecessary
wear and damage.
NOTICE
Mobilgrease XHP
™
222 (complying with
NLGI 2, EP, ISO 220 specifications)
recommended.
Grease Zerk Bank (4)
(Located on the front side of each leg)
-Typical View
Tie Rod Ball Grease Zerk (2)
(Located on the front legs)
-Typical View
* Shown with grease bank hose connection
Tower Bearing Grease Zerks (8)
(Located on the front and rear legs)
-Typical View
* Shown with grease bank hose connections