Hagie UpFront STS 16, Руководство пользователя

Страница: 97 / 341

4-2
SECTION 4 –
ENGINE AND DRIVE SYSTEMS
Jump Starting
1. Engage the parking brake.
2. Rotate the Battery Disconnect Switch
(located inside the engine compartment
on rear right-hand side of machine -
open hood to access) to the ON position.
3. Remove caps from the Auxiliary Battery
Charging Posts (located in the engine
compartment on rear right-hand side of
machine - open hood to access).
4. Connect cables from charging device
(i.e. battery charger or another machine)
to the Auxiliary Battery Charging Posts -
positive cable to the positive terminal,
and negative cable to the negative termi-
nal.
5. Allow batteries to charge approximately
5-10 minutes.
6. Engage the starter by starting the
machine.
7. Remove the charging cables in reverse
to the way you attached them (negative
cable first, then positive cable).
NOTE: Ensure that the charging cables do
not touch together or to any metal
surface.
8. Reinstall the Auxiliary Battery Charging
Post caps.
9. Allow engine to idle for approximately 5
minutes to recharge the batteries.
Engine Block Heater Power Cord
(Located beneath machine along
the right-hand side of engine)
-Typical View
* View looking from rear to front of machine
Battery Disconnect Switch
(Located inside engine compartment
on rear right-hand side of machine
- open hood to access)
-Typical View
NOTICE
Do not over-crank the starter. Failure to
comply may result in starter damage.
Auxiliary Battery Charging Posts
(Located inside engine compartment
on rear right-hand side of machine
- open hood to access)
-Typical View