Hagie UpFront STS 16, Руководство пользователя

Страница: 199 / 341

7-58
SECTION 7 –
SPRAY SYSTEMS
4. Rotate the Inlet Selector Valve(s)
(located near the bottom right-hand side
of chemical tank(s)) to the “FROM
CHEM TANK” position.
5. Engage the parking brake.
6. Start the engine.
7. Press the Field/Road Button (located on
the Machine Display Home Page) and
change the machine’s drive state to
FIELD.
NOTE: The drive state of the machine
cannot be changed unless the
Hydrostatic Drive Control Handle is
in the NEUTRAL position (and
machine speed is less than 0.5 mph/
0.8 km/h).
NOTE: The selected drive state will
illuminate.
8. Position boom to desired position.
9. Press the Main Tank Valve Switch
(located on the side console) in the UP
(Open) position.
NOTE: Main Tank Valve status (OPEN or
CLOSED) is displayed on the
Machine Display Home Page (Field
Mode).
Inlet Selector Valve(s)
(Located near the bottom
right-hand side of chemical tank(s))
-Typical View
* 1-tank/1-pump configuration show
Field/Road Button
(Located on the
Machine Display Home Page)
Main Tank Valve Switch
(Located on the side console)
-Typical View