Hagie UpFront STS 16, Руководство пользователя

Страница: 241 / 341

8-27
SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
15. Press the pump Rate Bump Button
(located on the spray system console) in
the UP position to increase solution
pressure to desired PSI (bar).
Step 3 - Rinsing the Boom and Nozzles
PRIMARY SYSTEM
1. Press the Main Tank Valve Switch
(located on the side console) in the
DOWN (Closed) position.
NOTE: When rinsing the boom and nozzles,
ensure the Boom Solution Valve
Switches (located on the Single
Product Section Keypad) are in the
ON position before activating the
Rinse Switch.
2. Press the Rinse Switch (located on the
side console) in the UP position to rinse
the boom and nozzles.
NOTE: A Rinse Mode Indicator is located on
the Machine Display Home Page -
Field Mode and will display current
rinse mode status (TANK or BOOM).
Manual (MAN) Rate Control Button
(Located on the spray system console)
-Typical View
* Your machine may vary,
depending on available equipment
Rate Bump Button
(Located on the spray system console)
-Typical View
* Your machine may vary,
depending on available equipment
Main Tank Valve Switch
(Located on the side console)
-Typical View
Rinse Switch
(Located on the side console)
-Typical View