Hagie UpFront STS 16, Руководство пользователя

Страница: 160 / 341

SECTION 7 –
SPRAY SYSTEMS
7-19
tion to enable Auto Fold operation of the
outer boom extensions.
When the boom state displays AUTO and
the Fold Extension Button is enabled, the
boom will operate with the Boom Extension
Switches (located on the side console).
NOTE: When the Fold Extension Button is
disabled, the main boom will unfold/
fold, but the outer boom extensions
will not.
3. Press and hold both Left and Right
Boom Extension Switches (located on
the side console) UP to unfold the boom
to the fully extended position on all sec-
tions.
4. Press and hold both Left and Right
Boom Extension Switches (located on
the side console) DOWN to fold the
boom in to the fully retracted position.
Manual Fold
Unfolding/Extending the Boom
NOTE: Ensure the Hydrostatic Drive Control
Handle is in the NEUTRAL position.
If the machine is put in gear during
fold operation, boom movement will
stop.
1. Press the Boom State Button (located on
the Machine Display Auxiliary Controls
Page) to the MANUAL position.
NOTE: The selected boom state will
illuminate.
Fold Extension (Ext) Button
(Located on the Machine Display
Auxiliary Controls Page)
• Left Boom
Extension Switch
• Right Boom
Extension Switch
Left and Right Boom Extension Switches
(Located on the side console)
-Typical View
NOTICE
Do not move the transom up or down
during boom fold procedure. Failure to
comply may result in severe damage to
the boom wing structures.
NOTICE
Do not lower the main lift while the boom
is in cradle. Failure to comply will result in
property damage.
Boom State Button - Auto/Manual
(Located on the Machine Display
Auxiliary Controls Page)