Hagie UpFront STS 16, Руководство пользователя

Страница: 272 / 341

SECTION 9 –
MAINTENANCE AND STORAGE
9-14
Hydraulic Filters
(Refer to your Parts Manual for specific
location and replacement part numbers)
Remove and replace hydraulic filters
every 500 hours of operation or yearly,
whichever occurs first.
•
Return Filter
• Pressure Filter
• Charge Pump Filter
• Case Drain Filters (2)
• Breather Cap
Replacing Hydraulic Filters
Return Filter
NOTE: Replace Return Filter when the filter
indicator indicates that replacement
is needed, becomes tripped, or after
500 hours of operation, whichever
occurs first.
1. Remove the four (4) bolts on top of the
Return Filter Housing (located on top of
the hydraulic oil reservoir) and set aside.
2. Remove Return Filter Housing cover and
set aside.
3. Remove and discard used Return Filter.
4. Install new Return Filter.
5. Reinstall filter housing cover and bolts.
Pressure Filter
1. Unlatch and lower metal shield (located
beneath front end of machine).
2. Using a 15/16” wrench on the Pressure
Filter Housing end bolt, turn “counter-
clockwise” and remove filter housing.
DEF Supply Module Filter
(Located beneath DEF Supply Module -
access from underside of machine)
-Typical View
Return Filter Housing
(Located on top of hydraulic oil reservoir)
-Typical View
Return Filter
(Located inside filter housing
on top of hydraulic oil reservoir)
-Typical View