Hagie UpFront STS 16, Руководство пользователя

Страница: 176 / 341

SECTION 7 –
SPRAY SYSTEMS
7-35
NOTE: Increasing or decreasing pump
speed will change the application
rate through the rate controller.
Master Spray Switch
Boom solution valve switches are
controlled by the Master Spray Switch
(located on the Hydrostatic Drive Control
Handle) and must be ON to open the
electronically-operated boom solution
valves.
This allows you to turn all of the boom
solution valves on or off at the same time,
such as turning them off when you reach the
end rows, and turning them back on when
you re-enter the field.
NOTE: When the Master Spray Switch is
ON, a Master Spray Indicator
(located on the Machine Display
Home Page - Field Mode) will
illuminate.
Spray System Console
The spray system is controlled by the
Spray System Console and the Solution
Pump Control Valve. The system receives
Pump Speed/Rate Switches
(Located on the side console)
-Typical View
Master Spray Switch
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
Master Spray Indicator
(Located on the Machine Display
Home Page - Field Mode)