Hagie UpFront STS 16, Руководство пользователя

Страница: 155 / 341

7-14
SECTION 7 –
SPRAY SYSTEMS
Power Lines
Hagie Manufacturing Company cannot
stress enough that extreme caution must be
taken when operating equipment near power
lines. Ensure there is more than sufficient
clearance when transporting, unfolding and
folding the boom, or spraying near power
lines.
As a safety precaution, a Power Line
Warning Message will appear on the
Machine Display before extending the outer
boom extensions or when operating in Auto
Fold. Press ACKNOWLEDGE showing that
you have acknowledged that there are no
overhead power lines or obstructions before
proceeding.
Hydraulically folding the extensions of a
120-ft. spray boom and shutting off the outer
section valves (Boom Solution Valve
Switches 1, 2, 8, and 9) essentially turns it
into a 70-ft. boom (see the following
illustrations).
WARNING
When operating or positioning the
booms, observe the following safety
precautions:
• Monitor both sides of the boom during fold
procedure.
• Cradle booms when leaving the machine
unattended.
• Ensure booms are folded when cradled.
• Select a safe area before unfolding/folding
the booms.
• Clear area of personnel.
• Check for overhead obstructions.
• Do not unfold/fold booms near power lines.
Contact with power lines can result in
serious injury or death.
• Spray equipment is designed for FIELD
USE ONLY. Do not attempt to use
machinery for anything other than it’s
intended purpose.
WARNING
Hydraulic and electrical control systems
are optimized for use of the spray boom
attachment. Any modification to these
systems may lead to unintended and
uncontrolled motion. DO NOT install
add-on control systems that are not
approved by Hagie Manufacturing
Company.
Power Line Warning Message
(Located on the Machine Display)