Hagie UpFront STS 16, Руководство пользователя

Страница: 300 / 341

SECTION 9 –
MAINTENANCE AND STORAGE
9-42
7. Turn the Hand Wash Pump Power
Switch OFF.
Removing From Storage
1. Inspect the condition of and test the air
pressure of all tires.
2. Carefully unseal all openings that were
previously sealed in the “Preparing for
Storage” process.
3. Clean and reinstall the batteries. Be sure
to attach the battery cables to the proper
terminals.
4. Tighten all belts. Inspect and replace any
worn belts.
5. Check the engine oil, hydraulic oil, and
engine coolant levels, and add if neces-
sary.
NOTE: A mixture of 50/50 water/antifreeze
will cool adequately in the summer,
as well as protect in winter.
6. If the Hand Wash System was winterized
prior to storage, fill hand wash reservoir
with fresh water and drain before use.
7. Thoroughly clean the machine and its
attachments.
8. Perform all recommended services as
instructed elsewhere in this section.
9. Attach the spray boom and manually
cycle all of the hydraulic functions 2 or 3
times to thoroughly lubricate the compo-
nents. Test the NORAC® system and all
of it’s functions according to the manu-
facturer’s operation manual.
10. Reset date and time on Machine Display.
11. For starting instructions, refer to “Engine
- Starting” provided in the
Engine and
Drive Systems Section
elsewhere in this
manual.
NOTICE
Protective compounds such as grease
can harden under exposure to weather
conditions. Be sure to remove any dried
grease and reapply new, if necessary.
Hand Wash Foot Pedal
(Located along the left-hand lower handrail)
-Typical View