Hagie UpFront STS 16, Руководство пользователя

Страница: 109 / 341

4-14
SECTION 4 –
ENGINE AND DRIVE SYSTEMS
NOTE: Engine speed can range between
850 and 2200 RPM in both Road and
Field Mode.
The Throttle Switch works with a timer to
tell the engine how fast to run. The longer the
operator holds the switch in either direction
(press UP/“rabbit icon” to increase the
speed, press DOWN/“turtle icon” to decrease
the speed), the more the engine will speed
up or slow down.
To Change Throttle Setting Values
Refer to “Machine Display” provided in the
Cab Section
elsewhere in this manual for
information.
Speed Ranges
Speed ranges are selected by pressing
the Shift Up/Down Switches (located on the
Hydrostatic Drive Control Handle). Refer to
“Machine Display” provided in the
Cab
Section
elsewhere in this manual for further
information on adjusting speed range
settings.
Example:
If speed ranges are set at 5, 10, 15, and
20 mph (8, 16, 24, and 32 km/h), the machine
will start in the 5 mph (8 km/h) target range.
Press the Shift Up Switch once to reach 10
mph (16 km/h). Continue to press switch to
reach 15 and 20 mph (24 and 32 km/h), as
desired. Press the Shift Down Switch
gradually to decrease speed range.
NOTE: The Shift Up/Down Switches can
also be held to increase or decrease
speed ranges.
Drive System Control
NOTE: The NEUTRAL position must be met
before changing the direction of the
machine.
WARNING
Ensure the back-up alarm is audible
when operating the machine in reverse.
Shift Up/Down Switches
(Located on the side of the
Hydrostatic Drive Control Handle)
-Typical View
• Shift
UP
• Shift
DOWN
N