Hagie UpFront STS 16, Руководство пользователя

Страница: 223 / 341

8-9
SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
NOTE: When the Master Spray Switch is
ON, a Master Spray Indicator
(located on the Machine Display
Home Page - Field Mode) will
illuminate.
Spray System Console
The spray system is controlled by the
Spray System Console and the Solution
Pump Control Valves. The system receives
data and automatically makes adjustments
based on the target rate of application set by
the operator.
Refer to the Spray System Console
manufacturer’s operation manual for
complete calibration and operating
instructions.
Wet Boom
The 9-section (Single Product) and 5-
section (Dual Product) Wet Boom on your
machine is featured with 1” (2.5 cm)
schedule 5 stainless plumbing and delivers
solution directly to the spray nozzles, which
allows for ease of flushing and cleaning of
the boom, as well as decreased
contamination/plugging of nozzles.
The Wet Booms are equipped with
Hypro® Express end caps on the end of the
boom tubing, which aid in eliminating trapped
air from the boom by allowing air to escape
through the nozzle body, reducing nozzle
turn-off time. The end caps are equipped with
a “quick-release” feature to assist in flushing
the Wet Boom tubes.
Master Spray Switch
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
Master Spray Indicator
(Located on the Machine Display
Home Page - Field Mode)
Spray System Console
-Typical View
(Your machine may vary according
to model and available equipment)
Wet Boom Plumbing
-Typical View