Hagie UpFront STS 16, Руководство пользователя

Страница: 77 / 341

3-41
SECTION 3 –
CAB
Example:
If the “Number of Ranges Field” is set to 4,
First Range Top Speed=5, and Last Range
Top Speed=20, range selection would look
like the following:
• Press OK.
The machine will automatically adjust the
new Target Speed according to the newly
entered values.
Throttle
Throttle Control Slope
Determines how fast engine speed
increases when the Throttle Switch (located
near the Hydrostatic Drive Control Handle) is
pressed in the UP (“rabbit icon”) position.
NOTE: Values are set as a percentage per
second.
NOTE: If Throttle Control Slope is set at 25
percent/per second and Throttle Max
is set at 100 percent, Throttle Up
Ramp should be at least four (4)
seconds to achieve 100 percent
throttle when operating the Throttle
Switch.
Throttle Up Ramp
Amount of time engine speed will increase
or decrease when the Throttle Switch
(located near the Hydrostatic Drive Control
Handle) is pressed UP or DOWN.
Throttle Max
Maximum percentage that engine speed
will achieve (e.g. If Throttle Max is set at 100
percent, throttle control will set engine speed
between 850 and 2200 RPM. If Throttle Max
is set at 0 percent, maximum engine speed
will be 850 RPM).
NOTE: Pressing the Throttle Switch (located
near the Hydrostatic Drive Control
Handle) in the UP (“rabbit icon”)
position will not increase engine
speed when Throttle Max is set at 0
percent.
To Change Throttle Setting Values
• Press the Throttle Button (located on the
Settings Page).
• On the “Throttle Settings” screen, press
EDIT (next to the desired Throttle set-
ting).
Range 1 2 3 4
Target
Speed 5 10 15 20
Speed Settings Screen
* Field Speed Settings Shown
Throttle Button
(Located on the Settings Page)