Hagie UpFront STS 16, Руководство пользователя

Страница: 108 / 341

SECTION 4 –
ENGINE AND DRIVE SYSTEMS
4-13
hand side of the steering column) and
press the Parking Brake Switch in the
DOWN (Off) position.
Deceleration (Decel) Pedal
When nearing an end row and speed
deceleration is desired, press the Decel
Pedal (located on the lower right-hand side of
the steering column) to decrease speed.
NOTE: The Decel Pedal is NOT a brake! It is
designated for speed reduction only.
Setting Decel Pedal Minimum Speed
Refer to “Machine Display” provided in the
Cab Section
elsewhere in this manual for
further information.
Target Speed
The Target Speed (displayed on the
Machine Display Home Page - Road and
Field Mode) is the speed in which the
machine travels when the Hydrostatic Drive
Control Handle is in the fully FORWARD
position and the Decel Pedal is NOT
pressed.
NOTE: The Target Speed displayed is the
maximum speed for the selected
speed range.
To Change Target Speed
Refer to “Machine Display” provided in the
Cab Section
elsewhere in this manual for
further information.
Throttle Switch
The Throttle Switch (located near the
Hydrostatic Drive Control Handle) is used to
control engine speed (RPM).
NOTE: The operator may select throttle
setting by operating the Throttle
Switch. However, engine speed is
also controlled by movement of the
Hydrostatic Drive Control Handle.
Decel Pedal
(Located on the lower right-hand
side of the steering column)
-Typical View
Target Speed
(Located on the Home
Page - Road and Field Mode)
Throttle Switch
(Located near the Hydrostatic
Drive Control Handle)
-Typical View