Hagie UpFront STS 16, Руководство пользователя

Страница: 60 / 341

SECTION 3 –
CAB
3-24
Economy Mode (D)
Economy Mode uses fresh air, fan speed,
and water valve control to maintain the set
point temperature. When active, A/C function
is disabled.
•
Press the Econ Switch to turn ON.
• Press the Econ Switch again to return
the system back to normal operation.
NOTE: An indicator light will illuminate when
Economy Mode is active.
Auto Mode (E)
Auto Mode allows the system to function
in fully automatic temperature control mode,
including automatic fan speed control. The
system will adjust the fan speed to the lowest
setting required to maintain cab set point
temperature.
•
Press the Auto Switch to turn ON and
OFF.
NOTE: An indicator light will illuminate when
auto mode is active.
Cab Temperature (F)
• Press the Cab Temp Switch to display
set point on the Digital Display.
NOTE: Press the Cab Temp Switch and
toggle between celsius (C) and
fahrenheit (F) temperatures.
NOTE: Current cab temperature will be
displayed for five seconds, then will
return to the set point temperature
display.
On/Off (G)
• The On/Off Switches power the cab
heater/air conditioner systems ON or
OFF.
NOTE: An LED numeric display is
illuminated when the unit is turned
on. The Digital Display will show the
current set point temperature.
Cab Vents
Your cab is equipped with adjustable
vents. Rotate to desired position, or
individually turn on or off with the directional
fins.
Spray System Console
The spray system is controlled by the
Spray System Console and the Solution
Pump Control Valve. The system receives
data and automatically makes adjustments
based on the target rate of application set by
the operator.
Refer to the manufacturer’s operation
manual for complete operating instructions
and programming information.
NORAC Monitor
-If Equipped
The NORAC Monitor controls the
automatic boom leveling system.
Cab Vent
-Typical View
Spray System Console
-Typical View
(Your machine may vary, depending
on model and available equipment)