Hagie UpFront STS 16, Руководство пользователя

Страница: 67 / 341

3-31
SECTION 3 –
CAB
NTB/60’ HsTB Setup
-If Equipped
• NTB Override Timer
• Float With Transom Down
• One Tap Transom Up
NOTE: Refer to your Nitrogen Tool Bar
operator’s manual for further
information.
Machine Setting Security
To Lock Machine Settings
• Press the Locked Parameters Button
(located on the Settings Page).
• On the “Change Locked Parameters”
screen, press the Up/Down Arrow But-
tons until desired setting is displayed.
NOTE: Single arrow buttons toggle up/down
one page. Double arrow buttons
toggle to either the first or last page.
• Press the “lock icon” next to desired set-
ting to the LOCKED position.
• Press OK.
• Press the Lock Button (located on the
Settings Page).
• Press OK to confirm locked settings.
NOTE: When the Lock Button is pressed,
the Locked Parameters and Change
Pin Buttons will disappear. These
buttons will re-appear when the Lock
Button is pressed and the correct pin
number is entered.
NOTE: Default Pin Number is “50525”.
To Unlock Machine Settings
• Press the “red illuminated” Lock Button
(located on the Settings Page).
• On the “Enter Lock Password” screen,
enter pin number.
• Press UNLOCK.
To Change Pin Number
• Press the Change Pin Button (located on
the Settings Page).
NOTE: Press the Lock Button and enter
current pin number to enable the
“Change Pin Button” to re-appear on
the display.
Locked Parameters Button
(Located on the Settings Page)
Change Locked Parameters Screen
Lock Button
(Located on the Settings Page)