Hagie UpFront STS 16, Руководство пользователя

Страница: 164 / 341

SECTION 7 –
SPRAY SYSTEMS
7-23
• To Disable , press the Auto/Manual But-
ton to the OFF (white) position or press
any one of the following boom control
switches (located on the Hydrostatic
Drive Control Handle):
- Transom Switch (Up/Down)
- Left or Right-Hand Boom Switch (Up/
Down)
NOTE: When the system is disabled, the
boom image will change from blue to
black.
NOTE: If the NORAC System becomes
inoperable, the Auto and Manual
Fold functions will still operate.
NORAC/Ag Leader System
Settings
-If Equipped
(Soil/Crop Mode, Target Height, and
Sensitivity)
NOTE: Settings may be adjusted through
the main Run Screen by pressing the
Boom Image or the Settings Button
(wrench icon), depending on model.
Refer to the NORAC or Ag Leader
manufacturer’s operation manual for
further information.
Soil/Crop Mode
Soil Mode allows the sensors to read the
height from the spray nozzles to the ground.
Crop Mode allows the sensors to read the
height from the spray nozzles to the top of
the crop canopy.
On the NORAC Pulse Monitor:
• Press the Settings Button (wrench icon)
(located on the main “Run Screen”) to
navigate to the Settings Screen.
• Press the Next Button (located next to
“Mode”) and select Soil, Crop, or Hybrid
Mode.
NOTE: Hybrid Mode is an improved Crop
Mode, which uses a combination of
the crop and soil readings to improve
control. This setting is recommended
in place of Crop Mode.
On the Ag Leader Monitor:
• Press the Boom Image (located on the
main “Run Screen”).
• Press the top drop-down arrow (located
on the Boom Height Control Options
Screen) and select Soil or Crop Mode.
Auto/Manual Button - Ag Leader
(Located on the main “Run Screen”)
-Typical View
* Your monitor may vary in
appearance, depending on model
Settings Screen
(NORAC)
-Typical View
* Your monitor may vary in
appearance, depending on model