5-13
SECTION 5 –
HYDRAULIC SYSTEMS
3. Engage the parking brake.
4. Start the engine.
5. Activate the Pressure Washer Pump
(located beneath platform on the rear
right-hand side of machine) by pressing
the Pressure Washer Switch (mounted
on the rear right-hand handrail) in the UP
(On) position.
6. The Pressure Washer is now ready for
use. Extend hose as desired.
7.
When finished,
retract hose and press
the Pressure Washer Switch in the
DOWN (Off) position.
Pump Maintenance
•
Check pressure washer pump oil level
daily. “Top off” as required.
•
Change the pressure washer pump oil
every 200 hours of operation.
•
30-weight non-detergent oil recom-
mended.
Pressure Washer Hose Reel
(Located near the rear
right-hand side of machine)
-Typical View
Pressure Washer Switch
(Mounted on the rear right-hand handrail)
-Typical View
NOTICE
Do not run acids, petroleum-based
solvents, highly chlorinated materials, or
insecticides through the pressure
washer pump. Failure to comply may
result in internal component damage.
Use only detergents formulated for use
with pressure washers and follow the
manufacturer’s instructions for use.
Pressure Washer Pump/Valve
(Located beneath platform on
rear right-hand side of machine)
-Typical View
• Pressure
Washer
Pump
• Pressure
Washer
Valve
Содержание UpFront STS 16
Страница 3: ...Ladder Fuel Fill 10 21 Tall Crop Package Installation 10 24 Troubleshooting 10 37...
Страница 341: ......