Hagie UpFront STS 16, Руководство пользователя

Страница: 75 / 341

3-39
SECTION 3 –
CAB
• On the “Select Service Interval” screen,
select desired service interval.
• Press EDIT (next to the service interval
you wish to change).
• Enter desired value.
• Press OK.
• Press RESET INTERVAL.
• Press BACK to return to the “Select Ser-
vice Interval” screen.
Press BACK again to return to the Set-
tings Page.
Drive State
The Drive State of the machine is
displayed on the Home Page - Road and
Field Mode.
•
Press the Field/Road Button (located on
the Home Page) to toggle between the
two Drive States. The selected Drive
State will illuminate.
NOTE: The Drive State of the machine
cannot be changed unless the
Hydrostatic Drive Control Handle is
in the NEUTRAL position (and
machine speed is less than 0.5 mph/
0.8 km/h).
The machine is featured with three (3)
Drive States: ROAD, FIELD, and FAULT.
The Drive State helps the machine determine
what kind of work it is meant to do - field work
or transport work.
Road Mode
In Road Mode, the machine is limited on
what functions can be operated. Road Mode
is used for transporting of the machine and
therefore, will allow the machine to reach
maximum speed.
NOTE: Engine speed in Road Mode can
range from 850 to 2200 RPM.
Field Mode
In Field Mode, the machine is allowed
function of attachments, such as Spray
Booms, Detasseler Combo Tool Bar, and
Nitrogen Toolbar (if equipped). All-Wheel
Steer (if equipped) is also only allowed in
Field Mode.
NOTE: Machine speed is limited and is
unable to reach maximum speed
while in Field Mode.
Service Intervals Button
(Located on the Settings Page)
Select Service Interval Screen
Field/Road Button
(Located on the Home
Page - Road and Field Mode)