GE H
EALTHCARE
D
IRECTION
5213326-100, R
EVISION
3
LOGIQ™ A3 S
ERVICE
M
ANUAL
4-6
Section 4-4 - Functional Checks
4-4-3
M Mode Controls
4-4-3-1
Preparations
1.) Connect one of the probes listed in Available Probe of Chapter-Installation to the system probe
connector.
2.) Turn ON the scanner (if it isn’t turned on already)
Figure 4-2 Controls available in M Mode
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.
Approved Document - 5213326-100TPH_r3.pdf Page 93 of 252