GE LOGIQ A3 Скачать руководство пользователя страница 45

Страница: 45 / 252

GE H

EALTHCARE

IRECTION

5213326-100, R

EVISION

LOGIQ™ A3 S

ERVICE

ANUAL

1-16

Section 1-5 - Warning Label Locations

Warning Label Locations (continued)

NOTE:

For an explanation of the symbols shown in the illustration, refer to latter pages in this chapter.
The CAUTION label for the radio influence is required to be attached on the console from April, 1996.
The GHOST label is required to be attached on the console from June, 1998.
The Sex determination label is required to be attached on the console from September 2001, for Asia
Only

L1 (Figure 1-2)

D1: Standard LCD monitor may rotate while
transporting. Bind the system securely to prevent
damage in transportation.
D2: To avoid injury by tipping over, DO NOT PUSH
THIS UNIT FROM THE SIDES.

D3:

DO NOT place a finger, hand or any object on

the joint of the monitor or monitor arm to avoid injury
when moving the monitor and monitor arm.Placing
objects on top of the monitor may cause the monitor
to tilt with the falling objects resulting in injury to the
operator.Do not place any objects on the monitor.

L2 (Figure 1-3)

D4: This machine should be used in compliance
with law. Some jurisdictions restrict certain uses,
such as gender determination.

L3 (Figure 1-4)
D5:

Identification and Rating Plate.

L4 (Figure 1-5)

D6: Possible shock hazard. Do not remove covers
or panels. No user serviceable parts are inside.
Refer servicing to qualified service personnel.
D7: Do not use the following devices near this
equipment: cellular phone, radio receiver, mobile
radio transmitter, radio controlled toy, etc. Use of
these devices near this equipment could cause this
equipment to perform outside the published
specifications. Keep power to these devices turned
off when near this equipment.
D8: Prescription Device: United States law restricts
this device to sale or use by or on the order of a
physicians U.S.A. Only)
D9: The CE Mark of Conformity indicates this
equipment conforms with the Council Directive 93/
42/EEC
D10: CISPR CAUTION: The LOGIQ A3 conforms
to the CISPR11, Group 1, Class A of the
international standard for Electromagnetic
disturbance characteristics.

D11: WEEE Label: This symbol indicates that the
waste of electrical and electronic equipment must
not be disposed as unsorted municipal waste and
must be collected separately. Please contact an
authorized representative of the manufacturer for
information concerning the decommissioning of
your equipment.
D12: The equipment weighs approximately 70 kg
(154 lbs). To avoid possible injury and equipment
damage when transporting from one area of use to
another:
• Be sure the pathway is clear.
• Limit movement to a slow careful walk.
• Use two or more persons to move the equipment
on inclines or long distance.

L5 (Figure 1-6)

D13: EIAJ Label (Japan Only).

L6 (Figure 1-7)

D14: Gost Label (Russia Only).

L7 (Figure 1-8)

D15: TUV Label: TUV Listing and Certification Mark
is used to designate conformance to nationally
recognized product safety standards. The Mark
bears the name and/or logo of the testing laboratory,
product category, safety standard to which
conformity is assessed, and a control number

L8 (Figure 1-9)

D16: Circuit breaker Label

L9 (Figure 1-10)

D17: Circuit breaker panel rating Label.

L12 (Figure 1-11)

D17: Front panel rating Label.

L10 (Figure 1-12)

D18: Signal ground point label CAUTION: This is
only for “FUNCTIONAL GROUNDING”, NOT
“PROTECTIVE EARTH”.

L11 (Figure 1-13)

Lamp contains Mercury Dispose According to Stete/
Local Law.

L13 (Figure 1-14)

ROHS Label