The OneCommand Utility User Manual
Page 92
•
Transmit Port Description Enabled - Provides a description of the port in an alpha-numeric
format. The value equals the ifDescr object, if the LAN device supports RFC 2863.
•
Transmit System Name Enabled - Provides the system's assigned name in an alpha-numeric
format. The value equals the sysName object, if the LAN device supports RFC 3418.
•
Transmit System Description Enabled - Provides a description of the network entity in an alpha-
numeric format. This includes system's name and versions of hardware, operating system and
networking software supported by the device. The value equals the sysDescr object, if the LAN
device supports RFC 3418.
•
Transmit System Capabilities Enabled - Indicates the primary function(s) of the device and
whether or not these functions are enabled on the device. The capabilities are indicated by two
octets. Bits 0 through 7 indicate Other, Repeater, Bridge, WLAN AP, Router, Telephone,
DOCSIS cable device and Station respectively. Bits 8 through 15 are reserved.
•
Receive Enabled - LLDP Receive can be enabled or disabled.
PFC Priorities Area
•
Active Priorities - The priorities that are marked active for PFC.
•
Enable - When checked, PFC is enabled.
•
Configured Priorities - The priorities that are configured, but might not yet be active.
FCoE Priority Area
•
Active Priority - The active FCoE priority.
•
Configured Priority - The configured FCoE priority.
Priority Groups Area
Active Groups
•
Group ID - The Priority Group ID.
•
Priority Membership - The different priorities that are assigned to the various Priority Groups.
This is the currently active configuration.
•
Bandwidth - The bandwidths that are assigned to different Priority Groups. This is the currently
active configuration.
Configured Groups
•
Group ID - The Priority Group ID.
•
Priority Membership - The configured priority membership grouping.
•
Bandwidth % - The configured value of bandwidth for the different Priority Groups.
Configure CEE Dialog Box Buttons
•
Defaults - Click to return parameters to default FCoE CEE settings.
•
Configuration Rules - Click to display the FCoE Priority window that lists the rules for configuring
FCoE priorities. You must observe the following rules when configuring CEE for FCoE adapter
ports:
1
One and only one priority is configured for the FCoE priority.
2.
Only one PFC priority must be selected and it must match the FCoE priority.
3.
The FCoE priority is assigned alone to any of the priority groups.
4.
All other priorities must be assigned to one and only one other priority group.
5.
Bandwidths of all the priority groups must add up to 100%.
•
OK - Click to apply and save your changes.
