The OneCommand Utility User Manual
Page 34
Target Discovery buttons
•
Add Portal - Click to add a target portal. See “Adding Target Portals” on page 34 for more
information.
•
Remove Portal - Click to remove a portal. See “Removing a Target Portal” on page 35 for more
information.
•
Target Login - Click to login to a selected target. See “Logging into Targets” on page 36 for more
information.
•
Target Sessions - Click to view active sessions for the selected target. See “Viewing Target
Sessions” on page 37 for more information.
•
Manually Add Target - Click to manually add an iSCSI target. See “Adding an iSCSI Target” on
page 36 for more information.
•
Remove Target - Click to manually remove an iSCSI target. See “Removing Targets” on page 37
for more information.
•
Refresh Targets - Click to manually force a complete rediscovery of the targets, querying all
configured iSNS servers and target portals.
Adding Target Portals
To add a target portal:
1.
From the iSCSI Target Discovery dialog box, click Add Portal. The Add Target Portal dialog box
appears.
2.
Enter the server IP address and TCP port number and click OK. After successfully adding a
target portal, that target portal's targets are discovered and appear in the target list.
Specifying Portal Specific Login Options
Normally, the login options for the portal defaults to the options specified on the Initiator Login Options
tab. However, the Advanced Login Options dialog box allows you to modify the portal specific login
options.
Note: While up to 128 targets can be found on an iSCSI port, only a maximum of 64 targets
can be discovered this way. Therefore, it is possible that not all the target portal's
targets will appear in the target list. However, they can be added manually or
discovered through iSNS.
