The OneCommand Utility User Manual
Page 29
Figure 8: Add Remote TCP/IP Host dialog box with CIM Credentials
a.
Edit the default CIM settings if necessary and click Add Host. You will receive a
message indicating the new host was successfully added.
Adding a Range of Hosts
Find the TCP/IP-accessed manageable hosts by searching a range of IP addresses. The Add Range of
TCP/IP Hosts dialog box enables you to build the initial list of TCP/IP accessed manageable hosts. (Not
available in read-only mode.)
Note: The ranges of IP addresses are only scanned each time you open the Add Remote
TCP/IP Hosts dialog box and click Start Discovery. The ranges are NOT
automatically scanned by the discovery server during its discovery cycles.
