The OneCommand Utility User Manual
Page 83
Figure 43: Host Driver Parameters tab - Host Selected
5.
Enter a new value in the Value field in decimal or hexadecimal format, depending on how the
current value is presented. If the value is in hexadecimal format, it is prefaced by “0x” (for
example -”0x2d”).
6.
To make a change temporary (the parameter to revert to its last permanent setting when the
system is rebooted), check Make changes temporary. This option is available only for dynamic
parameters.
7.
To make changes to multiple parameters, check Make all changes temporary. Only dynamic
parameters can be made temporary.
8.
Click Apply.
Changing Non-dynamic Parameter Values (Linux 8.2)
To change non-dynamic parameter values for Linux version 8.2:
1.
Navigate to the /usr/sbin/OneCommand directory and run the scripts to stop the OneCommand
Manager application processes. Type:
./stop_ocmanager
2.
Stop all I/O to LPFC attached devices.
3.
Unload the LPFC driver. Type:
modprobe -r lpfc
4.
Reload the driver. Type:
modprobe lpfc
