background image

The OneCommand Utility User Manual

Page 103

Configuring iSNS for iSCSI Target Discovery

An Internet Storage Name Server (iSNS) maintains a database of storage network elements that can be 
queried by other clients within the SAN. iSCSI storage devices in particular can register  targets with the 
iSNS for efficient discovery by iSCSI clients.  

Use the iSCSI SNS tab to configure the iSNS server or to discover the server using DHCP.

Figure 55: iSCSI SNS tab

To add a server:

1.

Click Update iSNS Server. The Update iSNS Server dialog box appears.

2.

Enter the server address and port and click OK

The new iSNS server is also queried for iSCSI targets and any discovered targets are added to 
the Target's table on the main Target Discovery tab.

To remove a server:

1.

Click Clear iSNS. The iSNS server is removed and no longer queried during a target refresh.

To discover servers using DHCP:

1.

Click Discover thru DHCP. If an iSNS server can be discovered through a DCHP server, it is 
configured and queried for targets.

Содержание OneCommand Manager 5.0
































































































































































































































Отзывы: