The OneCommand Utility User Manual
Page 11
3.
Type:
rpm -e elxvmwarecorekit-<
kit version
>
Or
rpm -e elxocmcore-esxNN-<
kit version
>
Where NN is 35 for an ESX 3.5 system.
In a New Linux System
Prerequisites
For existing systems the following must be installed before installing the OneCommand Manager
application CLI:
On
LP21000 series adapters
and OneConnect FCoE adapters:
•
Linux driver version 8.2.0.33.3p or later (For RHEL5 and SLES10 operating systems.)
•
Linux driver version 8.2.8.x (For SLES11 operating systems.)
On OneConnect iSCSI adapters:
•
be2iscsi driver ;
On OneConnect NIC adapters:
•
be2net driver
•
The be2net driver must also be installed if the adapter personality is iSCSI-NIC or FCoE-NIC.
Use the latest or matching driver from the Emulex Web site.
For new systems, the specific driver rpm file for your Linux version must be installed.
Procedures
To install the OneCommand Manager application CLI:
1.
Copy the applications kit tar file to a directory on the installation machine.
2.
Change (use cd command) to the directory to which you copied the tar file.
3.
Untar the file.
tar zxvf elxocmcore-<
supported_os
>-<
app_ver
>-<
rel
>.tgz
4.
Change (use cd command) to the core kit directory created in step 3.
cd elxocmcore-<
supported_os
>-<
app_ver
>-<
rel
>
5.
Run the install.sh script.
./install.sh
Note: On RHEL 5.3 and RHEL 5.4, the OneCommand Core rpm file requires Libnl. This
library is not installed by default, but can be obtained from the OS distribution media.
•
For i386 RHEL 5.3 and RHEL 5.4, use the 32bit libnl library.
•
For x86_64 RHEL 5.3 and RHEL 5.4, use the 64bit libnl library.
•
For ia64 RHEL 5.3 and RHEL 5.4, use the 64bit libnl library.
•
For PPC RHEL 5.3 and RHEL 5.4, use the 32bit libnl library.
Note: The core kit consists of 2 rpm files for each supported architecture and each
supported version of Linux:
1. elxocmlibhbaapi-*.rpm
2. elxocmcore-*.rpm
