The OneCommand Utility User Manual
Page 170
Npw - New password value.
Boot Commands
<…> = Required, […] = Optional
EnableBootCode
Supported by: Windows, Solaris SFS, Linux and VMware ESX Server
Syntax: hbacmd EnableBootCode <WWPN | MAC> <Flag>
Description: Enables or disables the boot code on the FC adapter or PXE BIOS of the NIC on the CNA
adapter. If the boot code is disabled on the FC adapter, the adapter will not boot from the SAN,
regardless of the value for the EnableBootFromSan boot param. If the boot code is enabled on the FC
adapter, the adapter will boot from the SAN if the EnableBootFromSan parameter is also enabled. If the
PXE BIOS is disabled on the CNA adapter's NIC, it will prevent booting from the NIC. If the PXE BIOS is
enabled on the CNA adapter's NIC, it will allow booting from the NIC.
Parameters:
WWPN - World Wide Port Name of object adapters.
MAC - MAC address of the NIC port of the CNA adapter.
Flag - E = Enable the boot code, D = Disable the boot code.
GetBootParams
Supported by: Windows, Solaris SFS, Linux and VMware ESX Server
Syntax: hbacmd GetBootParams <WWPN> <Type>
Description: Shows the boot parameters. If any arguments are missing or invalid, a suitable error is
reported. If all arguments are ok, the data is displayed in tabular form.
Parameters:
WWPN - World Wide Port Name of object adapter.
Type - X86, EFI, OB
SetBootParam
Supported by: Windows, Solaris SFS, Linux and VMware ESX Server
Syntax: hbacmd SetBootParam <WWPN> <Type> <Param> <Value1> [BootDev <Value2>]
Description: Performs a high-level read-modify-write operation.
•
For Adapter Params, the BootDev keyword and value must be omitted; otherwise, an error is
reported.
•
For Boot Device Params (OpenBoot) the BootDev keyword and value must be omitted;
otherwise, an error is reported.
•
For Boot Device Params (X86 and EFI) the BootDev keyword and value are required.
Parameters:
WWPN - World Wide Port Name of object adapter.
Type - X86, EFI, OB.
Param - Parameter Name.
Note: Not supported for OneConnect adapters. The boot code is always enabled on
OneConnect adapters.
