The OneCommand Utility User Manual
Page 55
•
Ex Count Orig - The number of FC exchanges originating on this port. (Not supported on
VMware ESX servers being managed through the CIM interface.)
•
Active XRIs - The number of active exchange resource indicators. (Not supported on VMware
based ESX platforms using the CIM interface.)
•
Received P_BSY - The number of FC port-busy link response frames received.
•
Link Transitions - The number of times the SLI port sent a link attention condition.
•
Elastic Buf Overruns - The number of times the link interface has had its elastic buffer overrun.
•
Rx Frames - The number of FC frames received by this adapter port.
•
Rx Words - The number of FC words received by this adapter port.
•
Rx KB Count - The received kilobyte count by this adapter port.
•
Rx Sequences - The number of FC sequences received by this adapter port. (Not supported on
VMware ESX servers being managed through the CIM interface.)
•
NOS count - The number of NOS events that have occurred on the switched fabric. (Not
currently supported for the SCSIport Miniport and Storport Miniport drivers, nor is it supported
for arbitrated loop.)
•
Dumped Frames - The number of frames that were lost due to a lack of host buffers available.
(Not currently supported for the SCSIport Miniport driver, the Storport Miniport driver or the
driver for Solaris.)
•
Loss of Sync - The number of times loss of synchronization has occurred.
•
Prim Seq Prot Errs - The primitive sequence protocol error count. This counter is incremented
whenever there is any type of protocol error.
•
Invalid CRCs - The number of frames received that contain CRC failures.
•
Ex Count Resp - The number of FC exchange responses made by this port. (Not supported on
VMware ESX servers being managed through the CIM interface.)
•
Active RPIs - The number of remote port indicators. (Not supported on VMware ESX servers
being managed through the CIM interface.)
•
Receive F_BSY - The number of FC port-busy link response frames received.
•
Primitive Seq Timeouts - The number of times a primitive sequence event timed out. (Not
supported on VMware ESX servers being managed through the CIM interface.)
•
Arbitration Timeouts - The number of times the arbitration loop has timed out. Large counts
could indicate a malfunction somewhere in the loop or heavy usage of the loop. (Not supported
on VMware ESX servers being managed through the CIM interface.)
If you selected a COMSTAR port, the following information is also displayed:
•
SCSI Write I/O Count - The number of SCSI write I/O requests received.
•
SCSI Write KB Count - The total number of kilobytes written.
•
Total SCSI I/O Count - The number of SCSI I/O requests received.
•
No Receive Buffer Count - The number of SCSI I/O requests that were dropped.
•
Queue Depth Overflow Count - The number of SCSI I/O requests received after a QFULL
condition.
•
Dropped SCSI I/O Count - The number of dropped SCSI I/O operations.
•
Aborted SCSI I/O Count - The number of aborted SCSI I/O operations.
•
Outstanding SCSI I/O Count - The number of SCSI I/O requests currently pending.
•
SCSI Read I/O Count - The number of SCSI Read I/O requests received.
•
SCSI Read KB Count - The total number of kilobytes read.
