The OneCommand Utility User Manual
Page 93
•
Cancel - Click to discard any changes you made.
Configuring CEE Parameters for iSCSI Adapter Ports
The CEE tab displays parameters for iSCSI adapter ports.
To view the CEE parameters for FCoE adapter ports:
1.
From the discovery-tree, select the iSCSI adapter port whose CEE properties you want to view.
2.
Select the CEE tab.
Figure 49: CEE tab for iSCSI adapter ports
CEE Tab Field Definitions
•
DCBX State -The current DCBX (Data Center discovery and Capability exchange protocol) state
(enabled or disabled).
•
DCBX Mode - The DCBX mode can be either CEE or CIN.
•
LLDP Transmit State - DCBX uses Link Layer Discovery Protocol (LLDP) to exchange
parameters between two link peers. For the DCBX protocol to operate correctly, both LLDP Rx
and Tx must be enabled. If either Rx or Tx is disabled, DCBX is disabled.
