The OneCommand Utility User Manual
Page 178
Parameters:
WWPN - World Wide Port Name of the adapter whose arbitrated loop map data you want to view.
PCIData
Supported by: Windows, Solaris SFS, Linux and VMware ESX Server.
Syntax: hbacmd PCIData <WWPN | MAC >
Description: Shows PCI configuration data for the adapter specified by the WWPN or MAC address.
The PCI registers displayed are specific to the function referenced in the OneCommand Manager
application CLI. For example, if the WWPN for the FCoE function is specified, the PCI registers for that
FCoE function are displayed. If the MAC address for the NIC function on that same physical port is
specified, the PCI registers for that NIC function are displayed.
Only the base PCI registers are displayed. The extended PCI registers are not available on a CNA.
Parameters:
WWPN - World Wide Port Name of the adapter whose configuration data you want to view.
MAC - MAC address of the NIC or iSCSI port whose configuration data you want to view.
The OneCommand Manager application CLI has a command that displays wakeup parameter
information, much the same way that OneCommand manager application displays it in its own control
field.
For example:
Vendor ID: 0x10DF Device ID: 0xF900
Command: 0x011E Status: 0x02A0
Revision ID: 0x01 Prog If: 0x00
Subclass: 0x04 Base Class: 0x0C
Cache Line Size: 0x10 Latency Timer: 0x40
Header Type: 0x00 Built In Self Test: 0x00
Base Address 0: 0xF9AEB004 Base Address 1: 0x00000000
Base Address 2: 0xF9AEAF04 Base Address 3: 0x00000000
Base Address 4: 0x00000001 Base Address 5: 0x00000000
CIS: 0x00000000 SubVendor ID: 0x10DF
SubSystem ID: 0xF900 ROM Base Address: 0x00000000
Interrupt Line: 0x1A Interrupt Pin: 0x01
Minimum Grant: 0xFF Maximum Latency: 0x00
Capabilities Ptr: 0x00
PostTest
Supported by: Windows, Solaris SFS, Linux and VMware ESX Server
Syntax: hbacmd PostTest <WWPN>
Description: Runs the POST on the adapter. Support for a remote adapter is TCP/IP access only.
Note: Not supported for OneConnect adapters.
