The OneCommand Utility User Manual
Page 153
After writing an entry into the log, you are prompted to clear the display. The default name of the saved
file is DiagTest.log. An example of a saved log file appears below:
Figure 92: Example of DiagTestLog window
To save the log file:
1.
After running a test from the Diagnostic Test Setup dialog box, click Save to File. The Select
Diagnostic Log file Name dialog box appears. The default name of a saved file is DiagTest.log.
2.
Browse to the desired directory, change the log file name if you want and click Save.
iSCSI, FCoE and NIC-Only Diagnostics (OneConnect Adapters Only)
Use the Diagnostics tab to do the following:
•
Run these tests on Emulex iSCSI, FCoE and NIC-Only adapter's installed in the system: (Not
available in read-only mode.)
•
DMA Loopback (see page 154)
•
PHY Loopback (see page 154)
•
External Loopback (see page 146)
•
Control adapter beaconing (see page 147) (Not available in read-only mode.)
