75
Gentier Real-Time PCR System
Figure D 11.2 Rel Quant interface Display Setting window
a.
Y axis
: If user select
Linear
option, the
Bar Chart
functional module will display the linear
coordinates of Y axis; if user select
Logarithm
option, the
Bar Chart
functional module will
display the logarithm coordinates of Y axis.
b.
SD
: user can check
Show SD
check box to display the SD value on
Bar Chart
functional
module.
c.
Display
: user can set the display mode of
Bar Chart
functional module. If user select
Relative Quantity
option, the
Bar Chart
functional module will display the relative
quantity ratio of the target gene and reference gene; if user select
Gene Expression
option,
the
Bar Chart
functional module will display the relative quantity ratio of target gene &
sample and reference gene & sample.
d.
Sort
: User can use
and
keys to set the display sort order of
Bar Chart
functional
module, including
Sample, Dye
or
Gene
.
Rel Quant Analysis Setting
After entering the relative quantification analysis interface, the application software will
automatically pop up the analysis setting window, which consists of
Gene and Sample
,
Amplification Plot
two tabs. User can set the relevant parameters for current relative
quantification analytical method in the analysis setting window.
I.
Amplification Plot
tab: the introduction of relevant parameters and function keys is same
with those introduced in
D-3.3.4.1Abs Quant - Abs QuantAnalysis Setting
.
II.
Gene and Sample
tab: user can set the dye, gene, sample and reference required for the
