out
Enter the keyword
out
to filter outbound BGP routes.
Defaults
Not configured.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
neighbor maximum-prefix
Control the number of network prefixes received.
Syntax
neighbor {
ipv6-address
|
peer-group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
To return to the default values, use the
no neighbor {
ipv6-address
|
peer-
group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group.
maximum
Enter a number as the maximum number of prefixes allowed
for this BGP router. The range is from 1 to 4294967295.
threshold
(OPTIONAL) Enter a number to be used as a percentage of
the maximum value. When the number of prefixes reaches
this percentage of the maximum value, the software sends a
message. The range is from 1 to 100 percent. The default is
75
.
warning-only
(OPTIONAL) Enter the keyword
warning-only
to set the
router to send a log message when the maximum value is
reached. If this parameter is not set, the router stops peering
when the maximum number of prefixes is reached.
Defaults
threshold =
75
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Border Gateway Protocol (IPv6 BGP)
769
