manualshive.com logo in svg

Dell MXL 10GbE, Справочное руководство

Поделиться
Скачать
Dell MXL 10GbE Скачать руководство пользователя страница 1415

If a priority group does not use its allocated bandwidth, the unused bandwidth is 
made available to other priority groups.

To remove a priority-group configuration in a DCB map, enter the 

no priority-

group bandwidth pfc

 command.

By default, equal bandwidth is assigned to each dot1p priority in a priority group. 
Use the 

bandwidth

 parameter to configure the bandwidth percentage assigned to 

a priority group. The sum of the bandwidth allocated to all priority groups in a DCB 
map must be 100% of the bandwidth on the link. You must allocate at least 1% of 
the total port bandwidth to each priority group.

Related 
Commands

dcb-map 

– creates a DCB map to configure PFC and ETS parameters and applies 

the PFC and ETS settings on Ethernet ports.

priority-pgid

 – configures the 802.1p priority traffic in a priority group for a DCB 

map.

show fcoe-map

Display the Fibre Channel and FCoE configuration parameters in FCoE maps.

M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module

Syntax

show fcoe-map [brief | 

map-name

]

Parameters

brief

Displays an overview of currently configured FCoE maps.

map-name

Displays the FC and FCoE configuration parameters in a 
specified FCoE map. The FCoE map is applied on Ethernet 
(FCoE) and FC ports to transmit FC storage traffic to a 
specified fabric.

Command 
Modes

• EXEC
• EXEC Privilege

Command 
History

Version 9.3(0.0)

Introduced on the M I/O Aggregator and MXL 10/40GbE 
Switch with the FC Flex IO module.

Usage 
Information

Use the 

show fcoe-map

 command to display the FC and FCoE parameters used 

to configure server-facing Ethernet (FCoE) and fabric-facing FC ports in all FCoE 
maps on an M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO 
module NPIV proxy gateway.

In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN 
fabric to which FC storage traffic is sent, and the FCoE VLAN to be used must be 
unique.

An FCoE map is used to identify the SAN fabric to which FCoE storage traffic is sent 
and to virtualize M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO 

FC Flex IO Modules

1415

Содержание MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды