5
802.1X
An authentication server must authenticate a client connected to an 802.1X switch port. Until the
authentication, only extensible authentication protocol over LAN (EAPOL) traffic is allowed through the
port to which a client is connected. After authentication is successful, normal traffic passes through the
port.
The Dell Networking operating software supports remote authentication dial-in service (RADIUS) and
active directory environments using 802.1X Port Authentication.
Important Points to Remember
The system limits network access for certain users by using virtual local area network (VLAN)
assignments. 802.1X with VLAN assignment has these characteristics when configured on the switch and
the RADIUS server.
• If no VLAN is supplied by the RADIUS server or if you disable 802.1X authorization, the port configures
in its access VLAN after successful authentication.
• If you enable 802.1X authorization but the VLAN information from the RADIUS server is not valid, the
port returns to the Unauthorized state and remains in the configured access VLAN. This safeguard
prevents ports from appearing unexpectedly in an inappropriate VLAN due to a configuration error.
Configuration errors create an entry in Syslog.
• If you enable 802.1X authorization and all information from the RADIUS server is valid, the port is
placed in the specified VLAN after authentication.
• If you enable port security on an 802.1X port with VLAN assignment, the port is placed in the RADIUS
server assigned VLAN.
• If you disable 802.1X on the port, it returns to the configured access VLAN.
• When the port is in the Force Authorized, Force Unauthorized, or Shutdown state, it is placed in the
configured access VLAN.
• If an 802.1X port is authenticated and put in the RADIUS server assigned VLAN, any change to the port
access VLAN configuration does not take effect.
• The 802.1X with VLAN assignment feature is not supported on trunk ports, dynamic ports, or with
dynamic-access port assignment through a VLAN membership.
debug dot1x
Display 802.1X debugging information.
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu]
[interface
interface
]
802.1X
125
